HUNT Gravel Race Wheelset

1459g Depth Width ext Width int size
25 mm 26 mm 24 mm 700c

Race-ready alloy upgrade wheels for those seeking quicker acceleration and high-speed hub engagement for their gravel or all-road bike.

Tire size: Optimized for 30 to 45mm tyres; work well with 25mm up to 55mm.

$699
Pre-Order Now. Shipping:
Shimano/SRAM HG Splined - Limited Stock
SRAM XD/XDR - Limited Stock
Campagnolo N3W (Ekar) - Limited Stock
Shimano Microspline - May Wk 4Items are selected to ship from us in the week stated. Delivery time is 2-6 days*

We will ask for axle info after checkout.

EXTRA10 can't be used in conjunction with other discount codes.

Order by 2pm (MST) for Next Day Shipping*

Our wheels are in high demand, don't miss out. Order now.

*If shown in stock (applies to lower 48 states)

The Purpose _

The Purpose _

The HUNT Gravel Race 700c wheelset was designed to offer super-sharp performance on the path less pedalled. The line between road and gravel has never been more blurred, so we built a wheelset that could excel on gravel and fast off-road segments, while providing the responsiveness and durability riders demand.

Lightweight 6069-T6 alloy rims offer quick acceleration, combined with our straight-pull Sprint hubs, providing just 7.5 degrees of engagement. Whether going full gas on the flats or cresting over a climb, you’ll be ready for whatever terrain lies ahead.

Gravel Race Wheelset

Full Specs _

Rims
Tubeless-ready – designed to work excellently with normal clincher tires and tubes or tubeless tires. Tubeless-rim tape and valves included. Hooked H_LOCK bead-seat up-kicks for easy and secure tubeless installation. 6069-T6 | 490 MPa + 69% UTS than 6061-T6, with higher fatigue and impact strength 28mm outer and 24mm inner width. Rounded 17mm deep profile. Micro-peened black finish strengthens the surface even further. Laser etched graphics for excellent durability.
  • Tubeless-ready – designed to work excellently with normal clincher tires and tubes or tubeless tires. Tubeless-rim tape and valves included.
  • Hooked
  • H_LOCK bead-seat up-kicks for easy and secure tubeless installation.
  • 6069-T6 | 490 MPa + 69% UTS than 6061-T6, with higher fatigue and impact strength
  • 28mm outer and 24mm inner width.
  • Rounded 17mm deep profile.
  • Micro-peened black finish strengthens the surface even further.
  • Laser etched graphics for excellent durability.
Spokes
24 front and 24 rear laced 2 cross. Sapim CX-Delta Aero Butted 2.0-2.2/0.9-2.0mmStraight-pull for excellent torsional strength and direct power transferCold drawn from high grade T302 (18/10) stainless steel wire by Sandvik SwedenBlack stainless treatment
  • 24 front and 24 rear laced 2 cross.
  • Sapim CX-Delta Aero Butted 2.0-2.2/0.9-2.0mm
  • Straight-pull for excellent torsional strength and direct power transfer
  • Cold drawn from high grade T302 (18/10) stainless steel wire by Sandvik Sweden
  • Black stainless treatment
Nipples
Alloy square body for external adjustment and square head for easy internal adjustment/tensioning. 16mm length for a strong connection to the spoke and added durability.14 gauge.Black anodized finish.
  • Alloy square body for external adjustment and square head for easy internal adjustment/tensioning.
  • 16mm length for a strong connection to the spoke and added durability.
  • 14 gauge.
  • Black anodized finish.
Front Hub
HUNT disc straight-pull super-light alloyForged and CNC’d 6066-T6 aluminium alloy body. 7075-T6 Heat treated aluminium alloy axles. Polished anodized black finish with laser graphics.Center-lock disc mount. Please note: If you require a 6 bolt adaptor you can purchase separately here.
  • HUNT disc straight-pull super-light alloy
  • Forged and CNC’d 6066-T6 aluminium alloy body.
  • 7075-T6 Heat treated aluminium alloy axles.
  • Polished anodized black finish with laser graphics.
  • Center-lock disc mount.
  • Please note: If you require a 6 bolt adaptor you can purchase separately here.
Rear Hub
HUNT H_Ratchet DBL disc straight-pull super-light alloy.H_Ratchet 40t ratchet rings on floating carrier with 9˚ engagementH_Ceramik freehub body reinforcement coating provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.All freehub standards accounted for.6066-T6 CNC’d aluminium alloy hub shell.Center-lock disc mount. If you require a 6 bolt adaptor you can purchase separately here.Polished anodized black finish with laser graphics.
  • HUNT H_Ratchet DBL disc straight-pull super-light alloy.
  • H_Ratchet 40t ratchet rings on floating carrier with 9˚ engagement
  • H_Ceramik freehub body reinforcement coating provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
  • All freehub standards accounted for.
  • 6066-T6 CNC’d aluminium alloy hub shell.
  • Center-lock disc mount. If you require a 6 bolt adaptor you can purchase separately here.
  • Polished anodized black finish with laser graphics.
Bearings
Super smooth precision bearings with waterproof grease specially selected for even the worst weather. Sealed cartridge replaceable units. Dual full-contact seals
  • Super smooth precision bearings with waterproof grease specially selected for even the worst weather.
  • Sealed cartridge replaceable units.
  • Dual full-contact seals
Axle Sizes
These wheels are compatible with the following axle specifications. We fit the axle adapters you need, just complete the simple form shown after checkout:Front: 12x100mm Thru-Axle, 9x100mm Thru-Axle, Quick Release 9x100mmRear: 12x142mm Thru-Axle, 12x135mm Thru-Axle, 10x135mm Thru-Axle, Quick Release 9x135mmIf you are unsure, please do not worry as our form includes the option to tell us your bike model. We will then do our best to support you and fit the correct axle adapters. We may contact you via email if we need further information. Plus, if you don't g Please note; this form is shown after you have completed your order.

These wheels are compatible with the following axle specifications. We fit the axle adapters you need, just complete the simple form shown after checkout:

  • Front: 12x100mm Thru-Axle, 9x100mm Thru-Axle, Quick Release 9x100mm
  • Rear: 12x142mm Thru-Axle, 12x135mm Thru-Axle, 10x135mm Thru-Axle, Quick Release 9x135mm
  • If you are unsure, please do not worry as our form includes the option to tell us your bike model. We will then do our best to support you and fit the correct axle adapters. We may contact you via email if we need further information. Plus, if you don't g Please note; this form is shown after you have completed your order.
Tires Info
HUNT recommend a 35-55mm tire for best performance, tire widths between 29mm and 65mm are also safe to use. You must not exceed the maximum tire pressure limits set out in the table below or the maximum limit set by your tire manufacturer if this is lower. Note: best performance is usually gained by using tire pressures lower than the maximum, you can see our blog post here about this.These wheels arrive tubeless-ready, with tubeless tape installed and tubeless valves included, but are also designed to work perfectly with inner tubes and clincher tires.You must not exceed the maximum pressure stated on your tire.
  • HUNT recommend a 35-55mm tire for best performance, tire widths between 29mm and 65mm are also safe to use.
  • You must not exceed the maximum tire pressure limits set out in the table below or the maximum limit set by your tire manufacturer if this is lower.
  • Note: best performance is usually gained by using tire pressures lower than the maximum, you can see our blog post here about this.
  • These wheels arrive tubeless-ready, with tubeless tape installed and tubeless valves included, but are also designed to work perfectly with inner tubes and clincher tires.
  • You must not exceed the maximum pressure stated on your tire.

HIGH SPECIFICATION COMPONENTS _

Rims


A strong and lightweight 6069-T6 heat-treated rim boasts 69% higher tensile strength vs 6061-T6 alloy. The updated Gravel Race Disc features a wider 24mm internal and 28mm external rim width, creating an optimal tire profile for wider gravel tires, giving excellent grip and lower rolling resistance.

Spokes

The CX Delta is one of the latest offerings from Sapim, offering the aero advantage of a bladed CX Ray, with the durability of a D-Light. SCFT (Sapim Cold Forging Technology) ‘Stretch’ the spoke while retaining the linear Molecular structure of the material, thereby increasing the spoke strength at the middle by at least 48%.

H_RATCHET 40T DBL HUB

H_Ratchet double-sided system (with two floating ratchet rings). With a 40t ratchet ring resulting in rapid 9˚ engagement. The freehub body features H_Ceramik anti-bite coating to ensure maximum durability.

BEARINGS

The heart of any wheel. Investing in them makes huge sense. We use high-grade double sealed smooth-rolling sealed cartridge bearings.

NIPPLES  

The conical shape of the double square nipple allows for increased accuracy in wheel building when combined with a nipple washer, allowing us to create evenly tensioned wheels with reduced stress points at the spoke hole.

WEIGHT


The consequence of the fanatic attention to detail is incredible durability and a resulting low 1403 gram wheelset weight. Acceleration and climbing are massively improved over many of the stock wheels supplied on CX/gravel disc brake bikes.

What's in the box _

  • Hunt Black Shield tubeless tape fitted to wheels.
  • The axle adapters needed for your bike, just fill in the simple form shown after order completion, the form is also included in your order confirmation page.
  • Cassette spacer for 8/9/10 speed
  • 35mm Tubeless Valves
  • Spare of each spoke plus nipples
  • Disc Rotor Lock Rings
  • Quality control card signed by your wheel builder
In the box

WARRANTY_

A full 3 years from purchase date warranty is offered to the original purchaser only on all Hunt bike wheels against material or workmanship defects, please click here to read full details.

Stated wheel weights: Our stated wheel weights reflect the wheelset only; without rim tape, tubeless valves or disc brake lock rings, as is industry standard. While our carbon layup processes are very precise, a 3% variance (lower or higher) in total system weight is completely normal in aluminum rim manufacturing.

All HUNT wheels models have to pass our harsh cobbled-rolling-road tests for rider weight limits,please see here for more details. Max system weight 297 lb(system weight – total weight of fully kitted up rider, bike and luggage). If the system is over 273 lb then an experienced bike mechanic should check the wheel regularly. We are cyclists ourselves and do of course go above and beyond to offer excellent service if you ever do experience any issues. We carry full spares at very reasonable prices and offer complete support.

We've got your back

Rider Experience Support

Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

Spares Available

Any spares for our wheelsets can be found on our website. If you assistance, contact us and we can help you.

Next Day Shipping

As enthusiastic cyclists, we know you want your bike gear so we make sure all in-stock items are packed and dispatched within 1 working day.* As soon as your order is dispatched you’ll receive an email notification.

*Subject to stock levels & cleared payment

60 Day Ride and Return

We are so confident that you'll be happy with you HUNT wheels that we offer a full 60 day to ride them & return for a full refund (or product swap). Click here to learn more.

ABOUT HUNT _

Hunt Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.

Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.

All of our wheels are built and finished by hand, inclusive of a full quality control inspection.