HUNT XC Wide MTB 29 Wheelset

1693g Width int size
F28 / R26 mm 29"

FEA developed alloy XC wheelset with front and rear specific rim profiles for maximum performance. Wide 28mm front rim width matched to a 26mm rear rim width for unparalleled traction and braking performance. Hand-laced to HUNT XC wheels with triple-butted Pillar spokes.

Tire size: Optimized for 2.2" to 2.4" tires; work well with 2.0" up to 2.6" tires.

$374.25 $499.00
25% off
Pre-Order Now. Shipping:
29" / Boost - Mar Wk 4
29" / Non-Boost - Limited StockItems are selected to ship from us in the week stated. Delivery time is 2-6 days*

We will ask for axle info after checkout.

Order by 2pm (MST) for Next Day Shipping*

Our wheels are in high demand, don't miss out. Order now.

*If shown in stock (applies to lower 48 states)

The Purpose _

<h1>Rim bed</h1><i>HUNT wheels are designed to be used as a tubeless system, featuring our state-of-the-art H-Lock rim bead with unique 'up-kicks' to secure your tire when seated. H-Lock minimizes side-to-side movement, reducing the risk of burping your tire and enhancing the overall performance of your ride. This system also creates a flawless rim-well seal for effortless installation and easy sealing of tubeless tires.</i>

The Purpose _

Enhance your cross-country ride with our XC Wide wheelset, engineered in collaboration with our top athletes and FEA modelled then impact tested at HUNT UK Headquarters. Designed to tackle the roughest and most technical XC terrain, with our unique front and rear-specific rim widths and profiles, paired with our proven hub technology.

Full Specs _

Rims
29" rim28mm (F) / 26mm (R) internal width.6069-T6 heat-treated alloy (+69% tensile strength vs 6061-T6)Tubeless-ready – designed to work best with tubeless tires. Tubeless rim tape and valves included.H-lock bead-seat up-kicks for easy and secure tubeless installation.Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.
  • 29" rim
  • 28mm (F) / 26mm (R) internal width.
  • 6069-T6 heat-treated alloy (+69% tensile strength vs 6061-T6)
  • Tubeless-ready – designed to work best with tubeless tires. Tubeless rim tape and valves included.
  • H-lock bead-seat up-kicks for easy and secure tubeless installation.
  • Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.
Spokes
J-bend cold drawn for ease of replacement.28 F&R spoke count.Pillar Spokes made from Sandvik T302 (18/10) stainless steel.Triple butted 2.0-1.6-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement).Black stainless treatment.
  • J-bend cold drawn for ease of replacement.
  • 28 F&R spoke count.
  • Pillar Spokes made from Sandvik T302 (18/10) stainless steel.
  • Triple butted 2.0-1.6-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement).
  • Black stainless treatment.
Nipples
Hard-anodized alloy for weight reduction and strength.Square body for external adjustment and hex head for easy internal adjustment/tensioning.Long 14mm thread for durability14 gaugeBlack hard anodizing
  • Hard-anodized alloy for weight reduction and strength.
  • Square body for external adjustment and hex head for easy internal adjustment/tensioning.
  • Long 14mm thread for durability
  • 14 gauge
  • Black hard anodizing
Front Hub
Asymmetric flanges for more balanced spoke tensions.Oversized axles.Extruded and CNC machined 6066-T6 heat-treated aluminium alloy body.7075-T6 aluminium alloy axles.6 bolt disc mount.Polished anodized black finish with laser graphics.
  • Asymmetric flanges for more balanced spoke tensions.
  • Oversized axles.
  • Extruded and CNC machined 6066-T6 heat-treated aluminium alloy body.
  • 7075-T6 aluminium alloy axles.
  • 6 bolt disc mount.
  • Polished anodized black finish with laser graphics.
Rear Hub
Extruded and CNC machined 6066-T6 heat-treated aluminium alloy hub body.148x12mm or 142x12mm spacing.H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.Boost QR skewers NOT supplied.6 pawl, 36 tooth RapidEngage freehub, with an engagement angle of just 5 degreesOversized 7075-T6 heat treated aluminium axles.9/10/11 speed Shimano/SRAM compatible freehub and SRAM XD Driver version available.7075-T6 aluminium alloy axles.6 bolt disc mount.Polished anodized black finish with laser graphics.
  • Extruded and CNC machined 6066-T6 heat-treated aluminium alloy hub body.
  • 148x12mm or 142x12mm spacing.
  • H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
  • Boost QR skewers NOT supplied.
  • 6 pawl, 36 tooth RapidEngage freehub, with an engagement angle of just 5 degrees
  • Oversized 7075-T6 heat treated aluminium axles.
  • 9/10/11 speed Shimano/SRAM compatible freehub and SRAM XD Driver version available.
  • 7075-T6 aluminium alloy axles.
  • 6 bolt disc mount.
  • Polished anodized black finish with laser graphics.
Bearings
Precision sealed cartridge replaceable units.Large diameter ball bearings for extra durability.Dual full-contact rubber seals.
  • Precision sealed cartridge replaceable units.
  • Large diameter ball bearings for extra durability.
  • Dual full-contact rubber seals.
Tires Info
HUNT recommends a 2.2" to 2.4" tire for best performance, tire widths between 1.4" and 2.8" are also safe to use.  Note: best performance is usually gained by using tire pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tire pressure limits set out in the table below or the maximum limit set by your tire manufacturer if this is lower.  
  • HUNT recommends a 2.2" to 2.4" tire for best performance, tire widths between 1.4" and 2.8" are also safe to use.  
  • Note: best performance is usually gained by using tire pressures lower than the maximum, you can see our blog post about this, read here. 
  • Tubeless-ready for lower weight and rolling resistance. 
  • You must not exceed the maximum tire pressure limits set out in the table below or the maximum limit set by your tire manufacturer if this is lower.  
Axle Sizes
Boost - 148x12mm (Rear) with 110x15mm (Front). 141x9mm (Rear) QR with 110x9mm (Front) QR adapters and Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.Standard - 142x12 (Rear) with 100x15mm (Front). QR adapters available (Not compatible with Microspline) - just complete the simple form after checkout. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.
  • Boost - 148x12mm (Rear) with 110x15mm (Front). 141x9mm (Rear) QR with 110x9mm (Front) QR adapters and Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.
  • Standard - 142x12 (Rear) with 100x15mm (Front). QR adapters available (Not compatible with Microspline) - just complete the simple form after checkout. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.

HIGH SPECIFICATION COMPONENTS _

Rims

Highly impact resistant 6069 T6 rim construction boasting a wide 28mm internal front and 26mm internal rear for optimal performance on any terrain. FEA modelled and tested in the UK to ensure class-leading impact resistance while retaining a comfortable ride at a competitive weight.

Rim Bed

HUNT wheels are designed to be used as a tubeless system, featuring our state-of-the-art H-Lock rim bead with unique 'up-kicks' to secure your tire when seated. H-Lock minimizes side-to-side movement, reducing the risk of burping your tire and enhancing the overall performance of your ride. This system also creates a flawless rim-well seal for effortless installation and easy sealing of tubeless tires.

SPOKES

We have chosen top of the line, triple butted Pillar Spokes with increased reinforcement at the spoke head. Not only are these spokes extremely lightweight, they are also able to provide a greater degree of elasticity when put under increased stress. The Pillar Spoke Reinforcement (PSR) puts more material at the spoke head, just before the J-Bend to prevent failure in this stress area.

Nipples

Hard-anodized 14 gauge alloy nipples offer a winning combination of lightweight design and unyielding strength. The large 14mm square body provides easy adjustability for maintenance and unbeatable durability.

Front Hub

Suited to match the needs of the modern trail bike rider. Featuring durable bearings and 7075-T6 series alloy axles to increase stiffness. These hubs have been selected based on their ability to perform on the most aggressive trails.

Freehub Body

Durability is a theme for HUNT as time and money you spend fixing is time and money you cannot spend riding or upgrading your bikes. As a result, we've developed the H_CERAMIK coating to provide excellent durability and protect against cassette sprocket damage often seen on standard alloy freehub bodies.

What's in the box _

  • Black Shield PET high tensile strength tubeless tape fitted to wheels.
  • Freehub fitted
  • 45mm Tubeless Valves
  • Spare of each spoke plus nipples
  • Quality control card signed by your wheel builder

<h1>In the Box</h1><ul><li>Black Shield PET high tensile strength tubeless tape fitted to wheels.</li><li>Freehub fitted</li><li>Tubeless Valves</li><li>Spare of each spoke plus nipples</li><li>Quality control card signed by your wheel builder</li></ul>

WARRANTY_

A full 3 years from purchase date warranty is offered to the original purchaser only on all Hunt bike wheels against material or workmanship defects, please click here to read full details.

All HUNT wheels models have to pass our harsh rolling-drum fatigue tests for rider weight limits, please see here for more details. Max system weight 135kg(system weight – total weight of fully kitted up rider, bike and luggage). If a rider is over 125Kgs then an experienced bike mechanic should check the wheel regularly and it is advisable to use tires at max 40psi as this will reduce the fatigue on the wheelset.

We've got your back

Rider Experience Support

Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

Spares Available

Any spares for our wheelsets can be found on our website. If you assistance, contact us and we can help you.

Next Day Shipping

As enthusiastic cyclists, we know you want your bike gear so we make sure all in-stock items are packed and dispatched within 1 working day.* As soon as your order is dispatched you’ll receive an email notification.

*Subject to stock levels & cleared payment

60 Day Ride and Return

We are so confident that you'll be happy with you HUNT wheels that we offer a full 60 day to ride them & return for a full refund (or product swap). Click here to learn more.

ABOUT HUNT _

Hunt Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.

Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.

All of our wheels are built and finished by hand, inclusive of a full quality control inspection.